|
Greetings,
Over the past 6 weeks, we hope you've become a little more
familiar with the Meinecke and GPI Flowmeter lines. Both feature
Liquid Flowmeters, which by definition are turbine style meters
in the truest sense of the word. But did you know that a
Paddlewheel meter is also considered part of the Turbine
Flowmeter Family?
In this final installment, we'll introduce you to Digiflow,
which includes a complete range of paddle wheel flow sensors,
flow indicators and flow transmitters along with panel mount
instruments and installation fittings. Additional FLS products
include Ultra Low Flow Meters and Insertion Style
Electromagnetic Flow Transmitters.
| in
this issue |
 |
|
|
| Type
100 Flow Sensor - The Heart of the Digiflow Line |
|
The
Type 100 Flow Sensor is the core item in the FLS Paddle
Wheel line of sensors. Most of it's specifications are
common to the Digiflow FLS product line.
Additional
Information / Data Sheets »
|
| Battery
Powered Flow Meters |
|
The
Type 215 Point-of-Use Flow Indicator/Totalizer uses a
standard 3.6V Lithium battery. A coil effect pulse output
flow sensor is employed. In a NEMA 4X is an LCD digital
display which shows flow rate (4-digits) or total flow
(6-digits) in any volumetric unit. Calibration is easily
performed in the field using the keypad.
Data
Sheets »
|
High
Viscosity Fluid?
What about using an insertion style Mag in place of a
turbine? |
|
The
Type 3110 is an insertion type transmitter. Output is
a 4-20mA analog signal proportional to the flowrate.
Compared to the paddle wheel type, these units are better
suited to handle slurries and high viscosity fluids. They
are not affected by ferrous particles which will foul the
magnetic rotors of the paddlewheel type meters. In addition,
they are less costly than full port magmeters and easier to
maintain. For plastic pipe 2" to 12"
For metal pipe 2" to 16"
Data
Sheets »
|
| Cross
Instrumentation - Your Flow Solutions Provider! |
|
Over
the past few weeks we've featured products and technologies
from Meinecke, GPI and Digiflow FLS...
Meinecke Flanged Turbine meters are available in
sizes ranging from 2" (50mm) to 12" (300mm) for
both Cold (<122° F) and Hot (< 266° F) water
service.
To compliment the larger Meinecke Turbines, we can also
offer you GPI's ½" to 2" turbine flow
meters. Available materials include Nylon, PVC, CPVC,
Aluminum, Brass and 316SS, giving you a flow meter for most
any clean, low viscosity (<100cP) liquid.
Rounding out our liquid flow measurement group is the Digiflow®
FLS line which includes a complete range of Paddlewheel
Flow Sensors, Flow Meters (indicators) and Flow Transmitters
along with panel mount instruments and installation
fittings.
Each of these product lines offers you a broad array of
accurate and dependable flow measurement solutions. As a
Master Distributor for all of them,
Cross Instrumentation offers these products to
you at competitive prices and lead times that fit your
schedule. Our Technical Support team has years of applied
experience and a passion for creating solutions to
industrial size problems! Call us today so that we can be
your "Flow Solution Provider".
We sincerely hope you've benefited from the information
provided in our Turbine Talk series of e-newsletters and we
look forward to your questions and comments.
Bill Michie
Your CI - Flow Solutions Provider...
|
|
| Low
Flow Measurement a Problem? |
 |
Take
a look at Digiflow's Low Flow Solution!
Flow Ranges:
1.05 to 52.83 GPH
(4 to 200 LPH)
or
1.58 to 211.33 GPH
(6 to 800 LPH)
Type ULF Flow Sensor - Produces a Hall Effect
pulse output which is typically fed to a panel mount
instrument for processing and reporting.
Type ULF-FT Battery Powered Flow
Indicator/Totalizer - Reed Switch pulse output sensor is
combined with flowrate/total flow LCD display (same as Type
215 above).
Type ULF-XFT 2-Wire Flow Transmitter - Reed switch
output sensor is combined with local flow rate/total LCD
display. Output signal is 4-20mA proportional to the
flowrate.
Data
Sheets...
|
|
