Flanged Turbine Meters
Phone: (800)332-3418 Fax: (770) 929-8278 Email:flowsolutions@crossco.com

Flowmeters Accessories Product Selector Library
History The Factory Production Factory Calibration

WP/Dynamic
Bulk liquid meter for measurement of high, relatively constant flows of both cold and hot water

Description/Application:

Bulk liquid meter for cold and hot  water service
Cold Water to 122° F - Hot Water to 266° F
Available in sizes ranging from 2" (50mm) to 12" (300mm)
Process Connection: ANSI 150lb (std) & 300lb (opt)  RF  Flange
Measurement accuracy of +/- 2% on flows
Replaceable measuring element can be removed for maintenance and/or replacement without removing the meter housing from the line
With its high degree of accuracy and the versatility of its accessories, Meinecke Flanged Turbine Meters are ideally suited for automatic batching, local or remote totalization or remote rate of flow indication
   
Performance Data - Cold Performance Data - Hot
Dimensional Data - Cold Dimensional Data - Hot
WP/Dynamic - BMF Series
Originally designed for measurement of brine solutions, the BMF series is ideal for measuring caustics sodas to 20%, Saline water to 10%, Glycol-water solutions to 30% & other Caustic solutions with pH values up to 9

Description/Application:
Available in sizes ranging from 2" (50mm) to 8" (200mm)
Cold Liquids to 122° F
Hot Liquids to 266° F
   
Performance Data - Cold Performance Data - Hot
Dimensional Data - Cold Dimensional Data - Hot


Accessories Electronics, Inline Strainers, Insulated Blankets
REED Style - Low Frequency Pulsed Output;
2-wire low frequency volt-free contact closure pulser;  
RD-01 is designed for use in Cold applications only;
RD-02 is designed for use in both Hot & Cold applications

Performance Data - Reed Style Pulser

OPTO Style - High Frequency Pulsed Output
The OPTO-01/02 is a 2-wire current switching device for use in both Cold (OP-01) and Hot (OP-02) water applications. This type of pulser is normally used for conversion to analog signals; (4-20mA) or as inputs to high definition batching units.
Performance Data - OPTO Style Pulser
FM1-D/K  - Frequency to Current Converter
The FM-1D/K is a µP-controlled frequency converter with display.
It converts input pulses to an analog current signal proportional to
the momentary flowrate.  Simply put... the FM-1D/K converts the 
Pulse input into a scaleable 4-20mA output.
Incoming Pulses are converted to:
Standard signal current output (4-20mA)
Pulse Totalization
Remote LED Indication of Flow-Rate or Total
CDL - Data Logger 
Portable Data Storage of Temperature, Pressure, Level & Flow
 
The CDL Data Logger is a mobile system that records measured values from reticulation networks independent of the main power supply. Review and evaluation are accomplished using a PC and Meinecke’s CDL-WIN software.
Inline Strainers
Protect your Flowmeter by installing an Inline Basket Strainer upstream.  Relatively inexpensive when compared to the cost of the equipment they protect, strainers remove unwanted particles from the pipeline before they have a chance to cause any damage to expensive flowmeters. 

 

Insulated Covers
Protect, insulate and maintain process temperatures with these durable insulated covers.  Custom made covers are available for all types of flowmeters, transmitters and other instrumentation products.
 

For more information on Meinecke Accessories
Call the Flow Specialists at CROSS INSTRUMENTATION


Product Selector Guide

WP/Dynamic / WP-BMF
Cold/
Hot

US Gallon & M3/Hr Registers
150lb ANSI RF Flanges
Product Selector
 Stock Items (Typical Quantities)

NOTE: Stock Meters are equipped with
US Gallon Registers & ANSI 150lb RF Flanged Connections
WP-HP
Cold / Hot

US Gallon & M3/HrRegisters
 300lb ANSI RF Flanges

          Size ŕ
â Type
 

2"
(50mm)
3"
(80mm)
4"
(100mm)
6"
(150mm)
8"
 (200mm)
10"
 (250mm)
12"
 (300mm)
WPD-Cold 828595 (10) 828601 (8) 828603 (8) 828607 (4) 828717 (2) 828719  (1) 828743 (1)
WPD-Hot 828596 (2) 828602 (2) 828604 (1) 828608 828718 828720 828744
WPD BMF Cold 828680 828982 828983 828985 828986 N/A N/A
WPD BMF Hot 828987 828989 828990 828992 828993 N/A N/A
WP-HP Cold 827444 827450 827456 827462 827468 828182 828188
WP-HP Hot 826364 827451 827457 827463 827469 828183 828189
Cross instrumentation
Phone: (800)332-3418 Fax: (770) 929-8278 Email:flowsolutions@crossco.com

Literature - Product Brochures, Data Sheets Instruction Manuals

Meinecke
Library
  WP/D Cold WP/D WP-QF Hot WP/D BMF Pulsers FM-1D/K CDL Data Logger
CI Product Brochure
Factory Data Sheet
WP/D WP-QF
WP/D WP-QF
Reed OPTO
Installation Manual

Join the Cross Instrumentation/Meinecke mailing list
Email:

Contact Information Resource Directory E-News Archives
 

Meinecke Meters
Flanged Turbine Meters
Back Home Forward Up Email

Copyright © 2002 by Cross Instrumentation 
Specifications subject to change without notice - 10/01/02

 
NOTE: The information provided above  has been compiled and published as a convenience to our customers. All technical designs, advice, and recommendations, including but not limited to, that appearing on this document are rendered free of charge. As a result, Cross Instrumentation disclaims any responsibility or liability to the buyer or user of this information for any result obtained or damages incurred by reason of the use or application of the design or other information contained herein.

 

 

 

Hit Counter