A1 Series Electronic Digital Meters

A1 Series Meter shown with Computer Electronics which is sold separately.

At time of order specify:

  • Nylon or Aluminum housing
  • Gallon or Litre calibration
  • NPT or ISO threads
  • Flow range desired

Applications:

  • Use Nylon housings for water, non-aggressive chemicals, and non-flammable fluids.
  • Use Aluminum housings for low viscosity petroleum fluids.
Low Flow Model 1 inch Model 2 inch Model
Design Type Paddlewheel Turbine Turbine
Flow Range 0.3 to 3 GPM
(1 to 10 LPM)		 3 to 50 GPM
(10 to 100 LPM)		 30 to 300 GPM
(100 to 1,000 LPM)
Operations:
Environment: Indoors and Outdoors
Operating Temperature: -40º to +250º F (-40º to +121º C)
Storage Temperature -40º to +250º F (-40º to +121º C)
Maximum Working Pressure
Nylon: 150 PSIG (10.3 bar)
Aluminum: 300 PSIG (20.7 bar)
Materials:
Housing: Nylon or Aluminum
Wetted Parts: Ferrite, Tungsten Carbide, Ceramic, Stainless Steel, and Nylon
Mechanical
Thread Type: NPT or ISO
Inlet/Outlet
Nylon: 1 inch (Low Flow and 1 inch only)
Aluminum: 1 inch
Low Flow, 1 inch and 2 inch

Quick Links:
GPI Catalog
2794kb		 Industrial Grade 
Turbine Metes		 A1 Series 
Turbine Meters		 Misc. Flow Products from Cross Instrumentation
GPI - Product
  Fact Sheets		 Turbine Meters - FAQ Meinecke 
Turbine Meters		 Cross 
Instrumentation 

Back One Page

www.crossinstrumentation.com

Forward One Page

Mail - Information Request

Back

Home

Forward

Up

Mail