 |
| |
|
|
|
|
|
Digiflow®FLOWX3 |
Paddle Wheel
Flow Meters & Instrumentation |
|
|
|
 |
The
Digiflow
FLOWX3
line includes a complete range
of paddle wheel flow sensors, flow
indicators and flow transmitters along with panel mount instruments and
installation fittings. Additional FLS products include Ultra Low Flow
Meters and Insertion Style Electromagnetic Flow Transmitters. |
|
|
|
|
Type
F300
Flow Sensor
The Heart of the
FLOWX3
Line
|
Features:
|
|
Designed
for Superior
Performance |
Pole Electrical Connector
- NEMA 4X |
|
-
Rugged
Industrial Design
-
High
Accuracy
-
Accurate
Low Flow Measurement
-
Large
Flow Velocity Range
-
Long
Service Life
-
Excellent
Corrosion Resistance
-
Anti-Fouling
Design
-
Low
Pressure Drop
-
Bi-Directional
|
Sensor
Body
- Available
in PVC, PP & PVDF or 316SS
- Standard sensor for 1/2" to 8" pipes
- Extended Length sensors for 10" to 30" pipes |
O-Rings
EPDM or Viton |
Integrated
Single Chip Electronics
Encapsulated in epoxy for corrosion resistance |
5
Blade ECTFE (Halar®) Rotor
- Open Channel
Design avoids cavitation
- Five small magnets within the blade produce
five pulses per
revolution of the rotor,
approximately
42/Hz/m/sec. |
Ceramic
Shaft & Bearings
- High chemical resistance
- Long Life - 20 years/m/sec.
- Self cleaning design |
|
|
 |
The simple
and reliable Paddlewheel Flow Sensor Type F3.00 is
designed for use with all types of solid-free liquids. The
sensors can measure flow velocities from 0.5 ft/sec producing a
highly repeatable frequency output signal. |
| |
|
|
|
Rugged
construction and a proven technology guarantee exceptional
performances with little or no maintenance required. |
| |
|
|
|
A
specifically designed family of installation fittings ensures a
quick and easy installation into all pipe materials from 1/2" to
24".
|
|
 |
 |
 |
|
F3.00 Flow Sensors |
F9.00 Flow Monitor
& Transmitter |
ULF Ultra-Low Flow
Sensor |
|
|
|
 |
 |
 |
|
Contact
Information |
Resource
Directory |
E-News
Archives |
|
|
|
|
|
|
|
 |
Digiflow®FLOWX3
Paddlewheel
Flowmeters |
 |
 |
 |
 |
 |
| Back |
Home |
Forward |
Up |
Email |
|
|
Copyright
© 2002 by Cross Instrumentation
Specifications subject to change without notice - 10/01/02
NOTE:
The information provided
above has been compiled and published as a convenience to our
customers. All technical designs, advice, and recommendations,
including but not limited to, that appearing on this document are
rendered free of charge. As a result, Cross Instrumentation
disclaims any responsibility or liability to the buyer or user of
this information for any result obtained or damages incurred by
reason of the use or application of the design or other information
contained herein. |