|
Modules |
|
P/N |
Description |
|
113265-1 |
Standard
Remote Kit Assembly
The kit modifies GPI
Electronic Digital Meters for applications
in specialized situations including remote
indication and high or low fluid temperature
metering applications. |
|
125100-1 |
4-20mA
Module
Combine the 4-20mA Module with an Industrial
Grade Turbine and Computer Electronics to
provide an industry standard analog signal
for connection to a wide variety of chart
recorders, display equipment and process
control equipment. |
|
113435-1 |
Conditioned Signal Output Module
Combine the Conditioned Signal Output Module
with a GPI Turbine Kit to create a low-cost
flow sensor with digital signal output which
interfaces with various counters,
controllers and compatible process
equipment. |
|
125070-1 |
External
Power Module Kit
Combining the External Power Module with
Pulse Access Module and Industrial Grade
Turbine allows the use of an external power
source (7 to 30Vdc) that supplies voltage to
the Computer Electronics. |
|
113275-1 |
FM
Approved Remote Kit Assembly
The Factory Mutual (FM) Approved Remote Kit
Assembly Modifies all GPI Electronic Digital
Meters for applications in specialized
situations including remote indication and
high or low fluid temperature metering
applications. |
|
120077-01 |
FM
Approved Sensor Kit
Designed for use with G2 Turbine Meters when
pulse output is required and the meter is
located with a hazardous location. Kit
Includes Sensor, Screws, Cover Plate and Jam
Nut. (113524-01 Connection Kit Sold
Separately) |
|
125060-1 |
Pulse
Access Module
Combining this Module with an Industrial
Grade Turbine and Computer Electronics
creates a low-cost flow sensor with both
local readout and a pulse output which
interfaces with various counters,
controllers and compatible process
equipment. |
|
Spare Parts |
|
113524-01 |
Connector
Kit for FM Approved Sensor
Includes MS3106-10SL-3S and Cable Clamp |
|
125066-500 |
Output
Cable Kit
100 Feet (30 Meters) for Conditioned Signal
Output Module, 4-20mA Module and Pulse
Access Module. 3-Wire |
|
125080-1 |
Pulse
Access Dust Cover
Used with the remote kit, this part replaces
the dust cover that houses the electronic
display. This module allows the signal
in from the turbine and a square wave open
collector output signal from 0 - 60 Vdc |
|
113272-500 |
Remote
Cable Kit
100 Feet (30 Meters) for Standard and FM
Remote Kits. 2-Wire |
|
113520-1 |
Battery
Kit (2 batteries included)
Sanyo - Lithium Battery (3V) CR12600SE |
|
Contact
Cross Instrumentation for part numbers,
pricing and application assistance regarding
individual spare parts... |
