Digiflow®FLS

Paddle Wheel Flow Meters & Instrumentation

 
Type 100 Flow Sensor
The Type 100 Flow Sensor is the core item in the FLS Paddle Wheel line of sensors. Most of it's specifications are common to the Digiflow FLS product line.  

Product Data Sheets

Additional Information

 

Battery Powered Flow Meters

The Type 215 Point-of-Use Flow Indicator/Totalizer uses a standard 3.6V Lithium battery.  A coil effect pulse output flow sensor is employed.  In a NEMA 4X is an LCD digital display which shows flow rate (4-digits) or total flow (6-digits) in any volumetric unit.  Calibration is easily performed in the field using the keypad.  Installation fittings are required.  Another battery powered flow meter is the Type 100BP / 400BP which includes a surface mount indicator/totalizer and a separate flow sensor. The indicator may be installed up to 10 meters away in a convenient reading location.
  • PVC, PP, PVDF or 316SS Bodies
  • 1/2" to 30" Pipe Sizes
Data Sheets

Flow Transmitters
The Type 2110 is a 2-wire flow transmitter with 4-20mA output.  A hall effect pulse output sensor is employed.  In a NEMA 4X is an LCD digital display which shows flow rate (4-digits) or total flow (6-digits) in any volumetric unit.  Calibration is easily performed in the field using the keypad.  Installation fittings are required.  3-Wire units are available.
  • Supply Voltage: 12 to 24Vdc
  • PVC, PP, PVDF or 316SS Bodies
  • 1/2" to 30" Pipe Sizes
Data Sheets

No-Flow Switches
The Type 105 No-Flow Switch opens an electrical circuit when flow velocity decreases to the preset trip point.  Typical applications are to protect a pump from running dry or pumping against a closed valve in the main pipe. A red/green bicolor LED indicates status locally: Red = No Flow, Green = Flow
  • Supply Voltage: 12 to 24Vdc
  • PVC, PP, PVDF or 316SS Bodies
  • 1/2" to 30" Pipe Sizes
  • Velocity Trip Point: Below 0.5 ft./sec. (0.15 m/sec)
Data Sheets

Ultra Low Flow -  Flowmeters (3 Types Available)
Type ULF Flow Sensor - Produces a Hall Effect pulse output that is proportional to the flowrate.  Output is normally fed to a panel mount instrument. Supply voltage is between 12 & 24Vdc.
Type ULF-FT Battery Powered Flow Indicator/Totalizer -
Reed Switch pulse output sensor is combined with flowrate/total flow LCD display (same as Type 215 above).
Type ULF-XFT 2-Wire Flow Transmitter - Reed switch output  sensor is combined with local flow rate/total LCD display.  Output signal is 4-20mA proportional to the flowrate.
  • ECTFE  Halar® sensor body offers high chemical resistance
  • 5-Blade Halar® rotor with embedded magnets
  • Sapphire shaft and bearings for long life
  • End Connections: 1/4" MNPT 
  • Flow Ranges: 1.056 to 52.88 GPH (4 to 200 LPH)
    or 1.58 to 211.33 GPH  (6 to 800 LPH)
Data Sheets

Electromagnetic Flow Transmitters
The Type 3110 is an insertion type transmitter. Output is a 4-20mA analog signal proportional to the flowrate.  Compared to the paddle wheel type, these units  are better suited to handle slurries and high viscosity fluids. They are not affected by ferrous particles which will foul the magnetic rotors of the paddlewheel type meters.  In addition, they are less costly than full port magmeters and easier to maintain.
  • For plastic pipe 2" to 12" 
  • For metal pipe 2" to 16"
Data Sheets

Top

Installation Fittings
Bolt On Saddle Installation Tee Weld On Adaptor Plug
  • PVC  

  • PP

  • PVDF

  • PVC

  • PP

  • PVDF

  • EPDM / Viton Seals

  • Carbon Steel

  • 316SS

  • Other Materials by request

  • 2 Sizes cover pipe sizes from: 1.5" to 30"

Plugs are used to cap off 
tees or saddles after a
 sensor is removed for relocation, repair, cleaning
 or pipeline maintenance. Standard O-rings are 
EPDM / Viton. 


Quick Links:

Digiflow FLS 
Installation Instructions
Digiflow FLS
Assembly Instructions
Misc. Flow Products from Cross Instrumentation

GPI Industrial Grade 
Turbine Metes

Meinecke 
Turbine Meters
Cross 
Instrumentation 

Back One Page 

www.crossinstrumentation.com Forward One Page Mail - Information Request

Digiflow®FLS


Atlanta Sales Support Center

Raleigh Sales Support Center

Knoxville Sales Support Center

1500 Farmer Road, Bldg J
Conyers, GA 30012
Phone  (770)929-8441
 Fax (770)929-8278
130 Quade Drive
Cary, North Carolina
(919) 481-1031 Phone
919) 481-2431 Fax
10700 Dutchtown Road
Knoxville, TN 37932
(865) 966-0969 Phone
(865) 966-8496 Fax
Georgia & Lower SC NC and Upper SC Tennessee