Chemline

Variable Area Flowmeters

 

Low Cost Visual Indication 
For Water, Chemicals or Gas

VariableAreaFlowMeter

F Series Variable Area Flow Meters are ideal for plastic piping. They provide a combination of accurate visual flow rate measurement and clear flow indication from a distance. Optional limit switches allow the units to signal a low or high flow alarm. Optional flow transmitter will send 4-20 mA output signal. The flowmeter must be installed vertically with flow upward.

Series:

FS: Full Size - 7" Dual Scale 
FC: Compact - 5" Single Scale
Materials: Tube: Clear PVC, Polyamide (PA), 
Polysulfone (PSU), or PVDF†
Float:  PVDF
Ends: PVC, CPVC, PP, PVDF Socket, 
Threaded, Flanged or Butt
O-Rings: EPDM, Viton

Flow Capability:

Up to 220 GPM (50,000 LPM)
Features:

Clear Visual Indication
Large red float is visible from a distance.

Easy Installation and Maintenance
Just unscrew union nuts and tube slides out of line.

Choice of Four Tube Materials for Many Applications:
Clear PVC
For Water or Chemicals up to 60ºC.
High Chemical resistance at low cost.

Polyamide (PA)
For Water or Air up to 75ºC.
High impact strength and optical clarity.

Polysulfone (PSU)
For Chemicals and Gases up to 100ºC.
High impact strength and good chemical resistance.

PVDF
For Chemicals and Ultrapure fluids up to 110ºC.
High impact strength and excellent chemical resistance.

Ideal for All Types of Plastic Piping

All types of end connections in PVC, CPVC, PP & PVDF.

Low Pressure Drop

High Measuring Accuracy
± 1% of full scale, ± 3% of low and mid scale.

Non Fouling
Float is self supporting in the flow. No guide rod (which can cause the float to jam) is necessary.

 

 

Union Ends 
Allow quick removal of tube for cleaning.
Range Indicators 
Slide along dovetail track. Operator may see at a glance whether flow is within proper range.
Scale* 
Read at top edge of float.
Large Red PVDF Float 
provides clear flow indication.
Optional Limit Switches 
For Maximum or Minimum alarm. Adjustable along track. With DIN plug-in electrical connector.
Because PVDF is translucent, a magnetic float and limit switches are usually used.
* Standard Scales: GPM and LPH (water) 
  

Click Button To Download Technical Data


Quick Links:

Digiflow FLS
Type 100 Sensors
Digiflow FLS
Product Overview
Misc. Flow Products from Cross Instrumentation

GPI Industrial Grade 
Turbine Metes

Meinecke 
Turbine Meters
Cross 
Instrumentation 

Back One Page

www.crossinstrumentation.com Forward One Page Mail - Information Request

Chemline


Atlanta Sales Support Center

Raleigh Sales Support Center

Knoxville Sales Support Center

1500 Farmer Road, Bldg J
Conyers, GA 30012
Phone  (770)929-8441
 Fax (770)929-8278
130 Quade Drive
Cary, North Carolina
(919) 481-1031 Phone
919) 481-2431 Fax
10700 Dutchtown Road
Knoxville, TN 37932
(865) 966-0969 Phone
(865) 966-8496 Fax
Georgia & Lower SC NC and Upper SC Tennessee